Microprocessor Flame Photometer Meter

Microprocessor Flame Photometer Meter

Price range: ₹4,000.00 through ₹60,400.00

Features

  • Microprocessor Based with Printer Interface
  • Four Measurements in Single Aspiration
  •  Setup Storage Facility
  •  Sample Data Storage Facility
  •  Curve Calibration Programmability Using Maximum of 25 Standards
  • Multiple Calibration Curve Saving Facility
  •  Data Processing Through Curve Fitting Techniques, Least Square,
  • Quadratic
  •  Direct Results in ppm and meq
  •  Useful for Medical & Soil Testings

Both Microprocessor Flamephotometers are used for the determination of Sodium, Potassium Calcium, Lithium & Barium They uses the Latest Microcontroller technology and advanced engineering techniques fo as t o g i v e e n h a n c e d a c c u r a c y a n d reproducibility. Theyhave soft touch membrane keys for ease of operation. The solution is aspirated through an atomizer air, sample and the fuel are mxed in the mixing chhamber which is then sprayed as a very fine mist into the flame.

Technical Specifications

Category Specification
Model General / Serum / Urine
Range General:
Na: 0–100 ppm, K: 0–100 ppm, Ca: 0–100 ppm, Li: 0–100 ppm, Ba: 50–1000 ppm
Serum:
Na: 0–200 (1:100 dil), K: 0–10 (1:100 dil), Li: 0–2 (1:5 dil)
Urine:
Na: 0–250 (1:100 dil), K: 0–100 (1:1000 dil), Ca: 0–10 (1:2 dil)
Sensitivity Na: 0.5 ppm, K: 0.5 ppm, Li: 0.5 ppm, Ca: 15 ppm, Ba: 50 ppm
Filters Na & K supplied; Ca & Li optional (extra cost)
Resolution 0.1 ppm/meq
Reproducibility <1% coefficient of variation for 20 consecutive samples using 10 ppm Na as max standard
Accuracy <2% error with 3 ppm Na/K and 5 ppm Li as maximum standards
Display 20 x 4 alphanumeric LCD with backlight
Averaging In-built in software
Flame System LPG and dry oil-free air
Detector Silicon photodiode
Calibration Up to 25 standards (5 per element) with curve fitting software
Multiple calibration curves stored in memory
Gas Control Adjustable with knobs
Flame Failure Auto detection
Gas Cut-off Automatic
Ignition System Auto ignition
Automizer Axial flow type
Printer Support Dot matrix / HP LaserJet / inkjet (non-Windows) with Centronics parallel interface
RS-232C Available (PC software optional)
Power Supply 230 V ± 10% AC, 50 Hz
Instrument Dimensions 285 × 255 × 210 mm (L × B × H) (Approx)
Instrument Weight 7.5 kg (Approx)

Compressor Unit

Parameter Specification
Air Supply Oil-free mini compressor with pressure regulator
Combustion Gas LPG controlled by precision regulator
Power Supply 230 V ± 10% AC, 50 Hz
Dimensions 290 × 255 × 210 mm (L × B × H) (Approx)
Weight 8 kg (Approx)
MODEL NO

SKY-486, (Extra Filter 1 each)

Reviews

There are no reviews yet.

Be the first to review “Microprocessor Flame Photometer Meter”

Your email address will not be published. Required fields are marked *

Scroll to Top